PMPN_Pharmaceutical & Medical Packaging News

Pharmaceutical & Medical Packaging News, September/October 2015

Issue link:

Contents of this Issue


Page 20 of 43

21 September/October 2015 Pharmaceutical & Medical Packaging News • Flexible Packaging Printing Adhesive Coatings A sterile medical packaging converter is using fexographic printing to coat lidstock in a single pass. By Daphne Allen Editor S teriPax Inc. (www.steripax. com) is streamlining the a d h e s i v e - c o a t i n g p r o - cess for savings. The com- p a n y h a s d e v e l o p e d a single-pass process for coating zones with six layers of adhesive in a sin- gle pass, explains Jack Roten, busi- n e s s d e v e l o p m e n t m a n a g e r . Launched about 3 years ago, the patent-pending process utilizes a flexo- graphic printing press to "print" the six layers. The first three stations of the nine- color press print ink, followed by six that "print" adhesive, explains Roten. "At the end of the machine we have a die-cutter that separates the lidstock, and then it is stacked and poly bagged. We can process up to 100 feet per minute." Roten says he had envisioned such a process for years, but needed a spe- cial formulation and company support. "Achieving this with a flexographic press is tricky," Roten says. "Adhesive tends to run, and it can be messy. We had to find a viscosity that would not bleed out and could be stacked upon itself. We chose a hot-melt acrylic hybrid material that allows us to layer it." Design Coat generally consists of three slightly different adhesives, with each one put on twice, he says. "There are various ingredients in each layer. The first layer adheres to the substrate, the second layer adheres to the first, the third adheres to the second, but the fourth does not adhere as much as the other layers do. (The fourth, fifth, and sixth layers do adhere to each other firmly.) This allows Design Coat lidstock to peel open smoothly between the third and fourth layers," he says. The adhesive can be clear, blue, or any color, really, says Roten, because the process uses a printer. The formu- lation can support peel strengths up to 5 lb/in., and it can also be adjusted to create a weld seal. In addition to coating lidstock, the company can also coat rollstock. All grades of Tyvek and paper can be coated, he adds. With Design Coat, the size of the strip in header bags can be reduced given the increase in breathable area, says Roten. The company is even experimenting with a header bag with a paper strip. Roten says that the process reduc- es the likelihood of missing adhesive. With typical coated materials, miss- ing adhesive is "not common, but it is not a rarity, either. It can afect seal strength," he says. Roten adds that there should be no concerns about sole sourcing or lack of redundancy. "We have the formula. If there is a flexographic press anywhere in the world, we can rent the machine to pro- duce Design Coat. And if the customer is big enough, we can always go to their local printer," he says. SteriPax currently runs Design Coat on two in-house flexographic printers. The company is current- ly supporting a number of already marketed applications, including over-the-counter medical devices. "Validation has been pretty fast," he reports. 0 SteriPax offers Design Coat for rollstock, header bags, lidstock, and pouches. Photography by Harte Robba.

Articles in this issue

Links on this page

Archives of this issue

view archives of PMPN_Pharmaceutical & Medical Packaging News - Pharmaceutical & Medical Packaging News, September/October 2015